Skip to Main Content

Content

Course Tabs

Overview

Course Prescription

The practical understanding of timber and its use in the construction industry. Design and detailing techniques for connections in timber structures, plywood structures, pole structures, timber floor systems, bridges, multi-storey buildings, formwork and falsework, arches and cable stayed systems.

Course Overview

Review of timber design principles, Cross-laminated timber panels, Large-dowel connections (brittle & ductile behaviours), Small-dowel connections (brittle & ductile behaviours), Design of steel brackets for connections, Multi-storey timber frame – gravity, Multi-storey timber frame – wind and seismic design.

Two assignment      

  1. Design of a CLT structure (gravity loading only) 
  2. Design of connections of a given structure

Workload Expectations

This course is a standard 15 points course and students are expected to spend 10 hours per week involved in each 15 point course that they are enrolled in.

For this course, you can expect an average weekly workload comprising 3 hours of lectures, 1 hour of tutorial, 2 hours of reading and thinking about the content and 4 hours of work on assignments.

Course Prerequisites, Corequisites and Restrictions

Prerequisite
Restriction

Locations and Semesters Offered

LocationSemester
City

Teaching and Learning

Campus Experience

Attendance (virtual or in-person) is expected at scheduled activities including lectures/tutorials to complete components of the course.
Lectures will be available as recordings. Tutorials are not recorded as they are used to answer student questions.

Piazza is used to supplement the learning experience and explain concepts further, NOT to re-deliver what has been delivered in the class room.

Learning Resources

Taught courses use a learning and collaboration tool called Canvas to provide students with learning materials including reading lists and lecture recordings (where available). Please remember that the recording of any class on a personal device requires the permission of the instructor.

Additional Information on Learning Resources

• Design notes available on CANVAS • Timber Design Guide, edited Dr Andrew Buchanan, Published NZ TIF, 2008 • NZ structural design actions (NZS 1170) • NZ timber structures design standard (NZS 3603) - Old code• NZ timber structures design standard (AS/NZS 1720.1:2022)• NZ steel structures design standard (NZS 3404) • Canadian CLT Handbook 2019 Ed. – free to download @ clt.fpinnovations.ca • XLAM Australasian Design Guide – free to download @ XLAM • RedStag Design Guide – free to download @ Redstag.com • Wood Handbook – free to download from US site

Copyright

The content and delivery of content in this course are protected by copyright. Material belonging to others may have been used in this course and copied by and solely for the educational purposes of the University under license.


You may copy the course content for the purposes of private study or research, but you may not upload onto any third-party site, make a further copy or sell, alter or further reproduce or distribute any part of the course content to another person.

Health and Safety

Students are expected to adhere to the guidelines outlined in the Health and Safety section of the Engineering Undergraduate Handbook.

Learning Continuity

In the event of an unexpected disruption, we undertake to maintain the continuity and standard of teaching and learning in all your courses throughout the year. If there are unexpected disruptions the University has contingency plans to ensure that access to your course continues and course assessment continues to meet the principles of the University’s assessment policy. Some adjustments may need to be made in emergencies. You will be kept fully informed by your course co-ordinator/director, and if disruption occurs you should refer to the university website for information about how to proceed.

Other Information

Open book exam. 3 hrs. All notes/books allowed. No laptop.

Academic Integrity

The University of Auckland will not tolerate cheating, or assisting others to cheat, and views cheating in coursework as a serious academic offence. The work that a student submits for grading must be the student's own work, reflecting their learning. Where work from other sources is used, it must be properly acknowledged and referenced. This requirement also applies to sources on the internet. A student's assessed work may be reviewed for potential plagiarism or other forms of academic misconduct, using computerised detection mechanisms.

Similarly, research students must meet the University’s expectations of good research practice. This requires:

  • Honesty - in all aspects of research work
  • Accountability - in the conduct of research
  • Professional courtesy and fairness – in working with others
  • Good stewardship – on behalf of others
  • Transparency – of research process and presentation of results
  • Clarity - communication to be understandable, explainable and accessible

For more information on the University’s expectations of academic integrity, please see the Academic Conduct section of the University policy hub.

Disclaimer

Elements of this outline may be subject to change. The latest information about taught courses is made available to enrolled students in Canvas.

Students may be asked to submit assessments digitally. The University reserves the right to conduct scheduled tests and examinations online or through the use of computers or other electronic devices. Where tests or examinations are conducted online remote invigilation arrangements may be used. In exceptional circumstances changes to elements of this course may be necessary at short notice. Students enrolled in this course will be informed of any such changes and the reasons for them, as soon as possible, through Canvas.


Assessment and Learning Outcomes

Course Learning Outcomes

CLO #OutcomeProgramme Capability Link
1
2
3
4
5

Assessments

Assessment TypeAssessment PercentageAssessment Classification

Additional Information on Assessment

A minimum mark of 50% on the final exam is required to pass this course REGARDLESS of the marks obtained in the assignments.

It is possible to submit late for the assignments, and the late submission penalty schedule will be included in the assignment handouts.

Students must sit the exam to pass the course. Otherwise, a DNS (did not sit) result will be returned.

Assessment to CLO Mapping

Assessment Type12345

Student Feedback, Support and Charter

Student Feedback

Feedback on taught courses is gathered from students at the end of each semester through a tool called SET or Qualtrics. The lecturers and course co-ordinators will consider all feedback and respond with summaries and actions. Your feedback helps teachers to improve the course and its delivery for future students. In addition, class Representatives in each class can take feedback to the department and faculty staff-student consultative committees.

Additional Information on Student Feedback

Students are encouraged to participate in the SET evaluation so that the course and its delivery can be improved.

Class representatives

Class representatives are students tasked with representing student issues to departments, faculties, and the wider university. If you have a complaint about this course, please contact your class rep who will know how to raise it in the right channels. See your departmental noticeboard for contact details for your class reps.

Tuākana

Tuākana is a multi-faceted programme for Māori and Pacific students providing topic specific tutorials, one-on-one sessions, test and exam preparation and more. Explore your options at Tuakana Learning Communities.

Inclusive Learning

All students are asked to discuss any impairment related requirements privately, face to face and/or in written form with the course coordinator, lecturer or tutor.

Student Disability Services also provides support for students with a wide range of impairments, both visible and invisible, to succeed and excel at the University. For more information and contact details, please visit the Student Disability Services’ website.

Wellbeing

We all go through tough times during the semester, or see our friends struggling. There is lots of help out there - please see the Support Services page for information on support services in the University and the wider community.

Special Circumstances

If your ability to complete assessed work is affected by illness or other personal circumstances outside of your control, contact a member of teaching staff as soon as possible before the assessment is due. If your personal circumstances significantly affect your performance, or preparation, for an exam or eligible written test, refer to the University’s aegrotat or compassionate consideration page. This should be done as soon as possible and no later than seven days after the affected test or exam date.

Student Charter and Responsibilities

The Student Charter assumes and acknowledges that students are active participants in the learning process and that they have responsibilities to the institution and the international community of scholars. The University expects that students will act at all times in a way that demonstrates respect for the rights of other students and staff so that the learning environment is both safe and productive. For further information visit Student Charter.

Student Academic Complaints and Disputes

Students with concerns about teaching including how a course is delivered, the resources provided, or supervision arrangements, have the right to express their concerns and seek resolution. The university encourages informal resolution where possible, as this is quicker and less stressful. For information on the informal and formal complaints processes, please refer to the Student Academic Complaints Statute in the Student Policies and Guidelines section of the Policy Hub.