Skip to Main Content

Content

Course Tabs

Overview

Course Prescription

An advanced, supervised design project that combines research, prototyping, tangible design work and in-depth stakeholder engagement toward investigation of a specific issue that would benefit from an advanced design response. Students will integrate appropriate research and design methods, synthesised findings and impact analysis at an in-depth level through a capstone report or case book.

Course Overview

In this course, students will extend and further advance skills, consulting with key stakeholders in the completion of a self-directed design project integrating design research, prototyping, and analysis. 

Main Programme

Workload Expectations

A 60 point course should tally 600 hours of work for each student.

Students will initially be expected to participate in a series of discussions, lectures and studio (design thinking) sessions with the supervisor(s), critics and clients in order to frame the design project theme(s), issue(s), design brief(s) and project plan.

Thereafter, students will work with individual supervisor(s), critics and clients to iteratively develop their work. Students should expect to be in regular one-0n-one weekly meetings to progress their individual and team work. The remainder of your time (close to 400 hours) will be dedicated to independent research and writing by the student and additional group work.

The following approximate guidelines can be referenced:

  • 24 hours workshop instruction, guest critic or client meeting hours (4 hrs six times per term)
  • 60 hours of preparatory reading (5 hrs p.w.)
  • 180 hours of assessed self study (15 hrs p.w.)
  •  336 hours of assessed engagement, individually and with peers, clients and critics (28 hrs p.w.)

Please note that evidence of student participation may be expected on a variety of online platforms and in environments beyond the Studio and Lab spaces. Such as Canvas, Discord, Zoom, and others.

Students must regularly check on the Canvas site for specific instructions and updates and be responsive to emails and texts.

Course Prerequisites, Corequisites and Restrictions

Prerequisite
Restriction

Additional Advice on Prerequisites

To complete this course students must enrol in DESIGN 710 A and B, or DESIGN 710

Locations and Semesters Offered

LocationSemester
City

Teaching and Learning

Campus Experience

Attendance is required at weekly sessions to complete components of the course. Lectures will be scheduled in advance and the recordings will be available afterwards on the Canvas site.

Group discussions and other activities will not be available as recordings. Guest lectures will be recorded and disseminated subject to the guests' approval.

Teaching and Learning Methods

This course will be delivered over 12 weeks in a Studio environment.
Studio time will be spent each week in various combinations of the following:
Discussions: any client-oriented project is emergent in nature, much of the success or otherwise of such a project depends on regular and engaged interaction with client(s), with each other and with your instructor(s) and guest critics. Students will discuss and debate relevant issues, pose questions and use principles and analysis frameworks that will improve practice and support project progress.
Project Support: working on the skills and methods required to complete various stages of individual and group assignment submissions with the support of teaching and technical staff. In particular these include research, synthesis, writing and visual design.
Self-guided activities: working individually, in peer-support groups or in group activities, students will move their project(s) forward in a self-directed manner.

Learning Resources

Taught courses use a learning and collaboration tool called Canvas to provide students with learning materials including reading lists and lecture recordings (where available). Please remember that the recording of any class on a personal device requires the permission of the instructor.

Additional Information on Learning Resources

BYOD: All students enrolled in this course should come to class with their own laptop. This is so students will have the core learning tools available in and outside of class. It also means students can increase their independence and have better control of a professional device to stimulate creativity and simplify their design process.

The highly recommended, recommended and minimum specifications for a laptop are listed here.

Software: Students will be informed of any recommended software on the course Canvas website.

Copyright

The content and delivery of content in this course are protected by copyright. Material belonging to others may have been used in this course and copied by and solely for the educational purposes of the University under license. You may copy the course content for the purposes of private study or research, but you may not upload onto any third-party site, make a further copy or sell, alter or further reproduce or distribute any part of the course content to another person.

Health and Safety

Students will be inducted on safe practices in the Design Lab, and complete specific safe use training for relevant machinery and tools.

Learning Continuity

In the event of an unexpected disruption, we undertake to maintain the continuity and standard of teaching and learning in all your courses throughout the year. If there are unexpected disruptions the University has contingency plans to ensure that access to your course continues and course assessment continues to meet the principles of the University’s assessment policy. Some adjustments may need to be made in emergencies. You will be kept fully informed by your course co-ordinator/director, and if disruption occurs you should refer to the university website for information about how to proceed.

Academic Integrity

The University of Auckland will not tolerate cheating, or assisting others to cheat, and views cheating in coursework as a serious academic offence. The work that a student submits for grading must be the student's own work, reflecting their learning. Where work from other sources is used, it must be properly acknowledged and referenced. This requirement also applies to sources on the internet. A student's assessed work may be reviewed for potential plagiarism or other forms of academic misconduct, using computerised detection mechanisms.

Similarly, research students must meet the University’s expectations of good research practice. This requires:

  • Honesty - in all aspects of research work
  • Accountability - in the conduct of research
  • Professional courtesy and fairness – in working with others
  • Good stewardship – on behalf of others
  • Transparency – of research process and presentation of results
  • Clarity - communication to be understandable, explainable and accessible

For more information on the University’s expectations of academic integrity, please see the Academic Conduct section of the University policy hub.

Disclaimer

Elements of this outline may be subject to change. The latest information about taught courses is made available to enrolled students in Canvas.

Students may be asked to submit assessments digitally. The University reserves the right to conduct scheduled tests and examinations online or through the use of computers or other electronic devices. Where tests or examinations are conducted online remote invigilation arrangements may be used. In exceptional circumstances changes to elements of this course may be necessary at short notice. Students enrolled in this course will be informed of any such changes and the reasons for them, as soon as possible, through Canvas.


Additional Information on Academic integrity

Generative AI tools, such as ChatGPT and DALL.E 2, may only be used in assessments approved by the Course Director/Course Coordinator. Without permission, students must complete assessments independently, without substantial assistance from AI tools. In approved assessments, students must include a written statement detailing any tool’s use and the prompts applied. 

Assessment and Learning Outcomes

Course Learning Outcomes

CLO #OutcomeProgramme Capability Link
1
2
3
4
5
6

Assessments

Assessment TypeAssessment PercentageAssessment Classification

Additional Information on Assessment

A total grade of 50% or higher is required to pass this course.

Where a student faces unavoidable personal circumstances (e.g. illness or a death in the family) that mean the student is unable to submit a component of coursework, he/she may apply for an extension.

Applications for extensions require that students complete the Design Programme Extension of Time Application Form https://www.forms.auckland.ac.nz/en/student/creative-arts-and-industries/design-programme-extension-of-time-application-form.html

The request is assessed by the Group Services Administrator and Course coordinator and must be supported by written evidence from a doctor or counsellor. The student must apply no later than five days before the due date of the assignment. In case of extreme difficulty closer to the assignment deadline contact your course coordinator directly.

No extensions will be granted for problems such as accidentally erased computer files, which should always be prevented by keeping backup copies. When an extension is granted, students are expected to submit evidence of work in progress on the original assignment due date to demonstrate what has been completed up to that date.

Assessment to CLO Mapping

Assessment Type123456

Student Feedback, Support and Charter

Student Feedback

Feedback on taught courses is gathered from students at the end of each semester through a tool called SET or Qualtrics. The lecturers and course co-ordinators will consider all feedback and respond with summaries and actions. Your feedback helps teachers to improve the course and its delivery for future students. In addition, class Representatives in each class can take feedback to the department and faculty staff-student consultative committees.

Additional Information on Student Feedback

Student feedback has been sought and will continue to be sought in shaping and developing further iterations of this course.

Class representatives

Class representatives are students tasked with representing student issues to departments, faculties, and the wider university. If you have a complaint about this course, please contact your class rep who will know how to raise it in the right channels. See your departmental noticeboard for contact details for your class reps.

Tuākana

Tuākana is a multi-faceted programme for Māori and Pacific students providing topic specific tutorials, one-on-one sessions, test and exam preparation and more. Explore your options at Tuakana Learning Communities.

Inclusive Learning

All students are asked to discuss any impairment related requirements privately, face to face and/or in written form with the course coordinator, lecturer or tutor. Student Disability Services also provides support for students with a wide range of impairments, both visible and invisible, to succeed and excel at the University. For more information and contact details, please visit the Student Disability Services’ website.

Wellbeing

We all go through tough times during the semester, or see our friends struggling. There is lots of help out there - please see the Support Services page for information on support services in the University and the wider community.

Special Circumstances

If your ability to complete assessed work is affected by illness or other personal circumstances outside of your control, contact a member of teaching staff as soon as possible before the assessment is due. If your personal circumstances significantly affect your performance, or preparation, for an exam or eligible written test, refer to the University’s aegrotat or compassionate consideration page. This should be done as soon as possible and no later than seven days after the affected test or exam date.

Additonal Information on Special Circumstances

Where a student faces unavoidable personal circumstances (e.g. illness or a death in the family) that mean the student is unable to submit a component of coursework, they may apply for an extension. Requests for extensions of time must be submitted and approved using the online Extension of Time Application form available on Canvas.

Students should notify the Course Director/Course Coordinator of their situation as soon as practicable, and preferably before any due date. Notifications received after an assessment due date will be accepted, where this is reasonable, within the context of the course. If possible, students are encouraged to seek medical, counselling or other support from the most appropriate sources. No extensions will be granted for problems such as accidentally erased computer files, which should always be prevented by keeping backup copies.

Student Charter and Responsibilities

The Student Charter assumes and acknowledges that students are active participants in the learning process and that they have responsibilities to the institution and the international community of scholars. The University expects that students will act at all times in a way that demonstrates respect for the rights of other students and staff so that the learning environment is both safe and productive. For further information visit Student Charter.

Student Academic Complaints and Disputes

Students with concerns about teaching including how a course is delivered, the resources provided, or supervision arrangements, have the right to express their concerns and seek resolution. The university encourages informal resolution where possible, as this is quicker and less stressful. For information on the informal and formal complaints processes, please refer to the Student Academic Complaints Statute in the Student Policies and Guidelines section of the Policy Hub.