Skip to Main Content

Content

Course Tabs

Overview

Course Prescription

Introduces students to three-phase electric machines and power system components. Covers theory, modelling and practical aspects for synchronous machines, induction machines, transformer connections, transmission lines and substation components.

Course Overview

  1. Three-phase Induction Machines

Background Review of Electromagnetic Fields and rotating magnetic fiels; Introduction to polyphase induction machine theory; Equivalent circuit; Torque & Torque-speed characteristics; Parameter determination; Rotor resistance; Starting methods & speed control; Practical aspects; Induction generator principle & characteristics; Doubly-fed induction generators.

2.     Transmission Line

Transmission line parameters; Transmission line models; Performance of transmission lines

3.    Three-phase Synchronous Machines

Construction & induced voltage in AC machines; Leakage fluxes; Equivalent circuit for Synchronous machine; Characteristics: Open & Short circuit, Power-angle, Steady-state operating curves - Compounding, Capability & V curves; Paralleling of Synchronous generators; Synchronous motor start-up methods;

4.     Per-unit systems and 3-phase Transformer connection

Background Review of AC Circuit Analysis, Per-unit system; three-phase transformer connections    

5.     Substation Engineering

Rating, technology & functionality of substation switching equipment- Circuit Breakers, Isolators, Contactors, Surge arrestors, Capacitor banks etc.; Current Transformer (CT) & Potential/Voltage Transformer (PT); Typical sub-station layout, cables and grounding; HVDC substations

Workload Expectations

This course is a standard 15 point course and students are expected to spend 10 hours per week involved in each 15 point course that they are enrolled in.

For this course, you can expect 24 hours of lectures, 5 hour tutorial, 6 hours of laboratories, 10 hours for pre-laboratory and post laboratory submission, 5 hours for an optional substation visit,  60 hours of reading and thinking about the content and 40 hours of work on assignments and/or test preparation.

Course Prerequisites, Corequisites and Restrictions

Prerequisite

Locations and Semesters Offered

Scheduled

YearTermCampusStart Date
2027Semester TwoCity19 July 2027

Other Attributes

Level 7 (Diploma, Bachelors Degree, Graduate Certificate, Graduate Diploma)

Teaching and Learning

Campus Experience

Attendance is required at scheduled activities including labs to receive credit for components of the course.
Lectures will be available as recordings. Other learning activities including tutorials/labs/ will not be available as recordings.
The course will not include live online events including group discussions.
The activities for the course are scheduled as a standard weekly timetable.

Learning Resources

Taught courses use a learning and collaboration tool called Canvas to provide students with learning materials including reading lists and lecture recordings (where available). Please remember that the recording of any class on a personal device requires the permission of the instructor.

Copyright

The content and delivery of content in this course are protected by copyright. Material belonging to others may have been used in this course and copied by and solely for the educational purposes of the University under license. You may copy the course content for the purposes of private study or research, but you may not upload onto any third-party site, make a further copy or sell, alter or further reproduce or distribute any part of the course content to another person.

Health and Safety

Students must ensure they are familiar with their Health and Safety responsibilities, as described in the University's Health and Safety policy.

Laboratory

All staff and students are required to carry out Health and Safety induction training before their schedule lab.  Please study the learning materials under the module of "MDLS Induction: Flexible Rooms" and complete the "MDLS Flexible Rooms Quiz". The score required to pass each quiz is 100%. You can attempt unlimited times until you achieve 10 out of 10 before you start to work in Flexible Rooms or participate in in-person specialised training.

There will be two compulsory lab sessions. The laboratory sessions involve experiments on synchronous and induction machines. The lab sessions are to facilitate understanding of the lecture material and get a feel for practical power system components. There will be a post-lab quiz on completion of the labs administered through Canvas.

The lab sessions are scheduled usually during the 5th and 8th teaching weeks. Make your lab slot booking online. Your laboratory journal record must be signed off by the lab TA at the end of the lab session to indicate satisfactory completion: failure to meet this requirement will result in a failing DNC grade for the course as a whole. Any DNC grade still uncorrected on 22nd October 2027 will be taken as the final grade for the year. Please note that under department rules only one lab re-run will be permitted after payment of missed lab rescheduling fees. No marks will be assigned for lab re-run for that component. 

Learning Continuity

In the event of an unexpected disruption, we undertake to maintain the continuity and standard of teaching and learning in all your courses throughout the year. If there are unexpected disruptions the University has contingency plans to ensure that access to your course continues and course assessment continues to meet the principles of the University’s assessment policy. Some adjustments may need to be made in emergencies. You will be kept fully informed by your course co-ordinator/director, and if disruption occurs you should refer to the university website for information about how to proceed.

Academic Integrity

The University of Auckland will not tolerate cheating, or assisting others to cheat, and views cheating in coursework as a serious academic offence. The work that a student submits for grading must be the student's own work, reflecting their learning. Where work from other sources is used, it must be properly acknowledged and referenced. This requirement also applies to sources on the internet. A student's assessed work may be reviewed for potential plagiarism or other forms of academic misconduct, using computerised detection mechanisms.

Similarly, research students must meet the University’s expectations of good research practice. This requires:

  • Honesty - in all aspects of research work
  • Accountability - in the conduct of research
  • Professional courtesy and fairness – in working with others
  • Good stewardship – on behalf of others
  • Transparency – of research process and presentation of results
  • Clarity - communication to be understandable, explainable and accessible

For more information on the University’s expectations of academic integrity, please see the Academic Conduct section of the University policy hub.

Disclaimer

Elements of this outline may be subject to change. The latest information about taught courses is made available to enrolled students in Canvas.

Students may be asked to submit assessments digitally. The University reserves the right to conduct scheduled tests and examinations online or through the use of computers or other electronic devices. Where tests or examinations are conducted online remote invigilation arrangements may be used. In exceptional circumstances changes to elements of this course may be necessary at short notice. Students enrolled in this course will be informed of any such changes and the reasons for them, as soon as possible, through Canvas.


Additional Information on Academic integrity

AI Usage in Assessment

This ELECTENG 309 course is an early adopter of the University of Auckland’s new “Two-lane” approach. Under the “Two-lane” approach, some assessments will allow the use of Artificial Intelligence (AI), while others will not. The purpose of the “Two-lane” approach is to provide you with clarity and transparency on the use of AI in assessment”. 2026 was the first year we implemented this. Based on the feedback received through our surveys, we will fine-tune it when this course is delivered in 2027 semester 2.

Each assessment in this course will be marked as Lane 1 (controlled assessments) or Lane 2 (uncontrolled assessments). Lane 1 and Lane 2 are defined as:

• Lane 1—Controlled Assessments: graded assessment undertaken in controlled conditions. By default, AI is not permitted. In specified circumstances, you might be permitted to use certain AI tools, and this will be clearly indicated in the Assessment description on Canvas. Examples of Lane 1 assessments are exams, tests and interactive oral assessments.

• Lane 2—Uncontrolled Assessments: graded or ungraded assessment undertaken in uncontrolled conditions. You can use AI to assist the development of your assessment, and this use is not restricted. Examples of Lane 2 assessments are essays, posters, lab/studio reports, forum posts, annotation of diagrams or readings, peer reviews, computer programs, mathematical equations, personal reflections, designs.

For more information about the use of AI in assessment, please see the University of Auckland’s Assessment of Courses Procedures.

Assessment and Learning Outcomes

Course Learning Outcomes

CLO #OutcomeProgramme Capability Link
1
2
3
4
5
6
7

Assessments

Assessment TypeAssessment PercentageAssessment Classification

Additional Information on Assessment

A passing mark is 50% or higher, according to the University policy. Students must sit the exam to pass the course. Otherwise, a DNS (did not sit) result will be returned.No late submission is allowed unless late submission penalties are specified on Canvas.

Assessment to CLO Mapping

Assessment Type1234567

Student Feedback, Support and Charter

Student Feedback

Feedback on taught courses is gathered from students at the end of each semester through a tool called SET or Qualtrics. The lecturers and course co-ordinators will consider all feedback and respond with summaries and actions. Your feedback helps teachers to improve the course and its delivery for future students. In addition, class Representatives in each class can take feedback to the department and faculty staff-student consultative committees.

Additional Information on Student Feedback

The 2024 feedback received indicate that the updated sequence of teaching modules and the various assessment component flowed well.  The laboratory experience for the students have been suggested for more engagement from the GTA's.  There is a request for substation tours.   Due to covid restrictions we could not do it for the past few years due to electricity utilities not being able to accommodated due to Health & safety requirements. They have now agreed to offer availability for guided tour in 2025.   Some students have also commented on not having practice quiz/tutorials for circuit and electromagnetic material from year-2 of EEE courses.  For 2025, this will be dropped and instead the sessions will be used for having tutorial sessions for material covered in the course.

Class representatives

Class representatives are students tasked with representing student issues to departments, faculties, and the wider university. If you have a complaint about this course, please contact your class rep who will know how to raise it in the right channels. See your departmental noticeboard for contact details for your class reps.

Tuākana

Tuākana is a multi-faceted programme for Māori and Pacific students providing topic specific tutorials, one-on-one sessions, test and exam preparation and more. Explore your options at Tuakana Learning Communities.

Inclusive Learning

All students are asked to discuss any impairment related requirements privately, face to face and/or in written form with the course coordinator, lecturer or tutor. Student Disability Services also provides support for students with a wide range of impairments, both visible and invisible, to succeed and excel at the University. For more information and contact details, please visit the Student Disability Services’ website.

Wellbeing

We all go through tough times during the semester, or see our friends struggling. There is lots of help out there - please see the Support Services page for information on support services in the University and the wider community.

Special Circumstances

If your ability to complete assessed work is affected by illness or other personal circumstances outside of your control, contact a member of teaching staff as soon as possible before the assessment is due. If your personal circumstances significantly affect your performance, or preparation, for an exam or eligible written test, refer to the University’s aegrotat or compassionate consideration page. This should be done as soon as possible and no later than seven days after the affected test or exam date.

Student Charter and Responsibilities

The Student Charter assumes and acknowledges that students are active participants in the learning process and that they have responsibilities to the institution and the international community of scholars. The University expects that students will act at all times in a way that demonstrates respect for the rights of other students and staff so that the learning environment is both safe and productive. For further information visit Student Charter.

Student Academic Complaints and Disputes

Students with concerns about teaching including how a course is delivered, the resources provided, or supervision arrangements, have the right to express their concerns and seek resolution. The university encourages informal resolution where possible, as this is quicker and less stressful. For information on the informal and formal complaints processes, please refer to the Student Academic Complaints Statute in the Student Policies and Guidelines section of the Policy Hub.