Skip to Main Content

Content

Course Tabs

Overview

Course Prescription

Overview of building regulatory systems, compliance pathways and standards. Structural loading for gravity and wind in accordance with the loading code AS/NZS1170. Design principles and examples for concrete and timber members and design for timber framed buildings using NZS3604 including the concept of safety in design. Discussion of sustainability and environmental implications of selecting different building materials. Introduction to seismic building behaviour at a conceptual level.

Course Overview

Structural Design for Civil Engineers is designed to provide our Civil Engineering students with an understanding of the principles of basic structural design in the main materials of concrete, timber and steel. The course builds on the knowledge gained from previous courses on the analysis of simple structures and the mechanical properties of materials needed for structural design. The course will cover an overview of building regulatory systems, compliance pathways, and standards. The loading codes AS/NZS1170 will be presented with the significance of uncertainties of loading discussed. The concepts behind lateral loading, including seismic and wind, will be covered at a conceptual level such that load paths and structural systems can be discussed in context.

This course will focus on the specific design of beams for flexure and shear, as well as looking at the key considerations and design philosophy in the design of other structural elements and structural systems. The concept of non-specific design for timber will be used to investigate simple design for a residential project using NZS3604.

This course consists of lectures, a weekly tutorial, quizzes, a mid-semester test and a design assignment. In addition, you will be expected to learn from additional reading, problem solving, structural drawings and other work outside of formal contact hours. The course requires students to become familiar with part of the Design Actions Standard and the material standards for concrete, timber and steel. The course is well supported by the course notes and published texts.

Workload Expectations

This course is a standard 15 point course, and students are expected to spend 10 hours per week involved in each 15 point course that they are enrolled in.

During a typical teaching week, there will be 3 hours of lectures and 1 hour of tutorial. In addition, there will be a 2 hour lab once during the semester. For the 12 teaching weeks, this totals to 50 hours. Since the course as a whole represents approximately 150 hours of study, that leaves a total of 100 hours across the entire semester for independent study, e.g. reading, reflection, preparing for and completing assessments. 

Course Prerequisites, Corequisites and Restrictions

Prerequisite
Restriction

Locations and Semesters Offered

LocationSemester
City

Teaching and Learning

Campus Experience

Attendance is expected at scheduled activities, including tutorials, to complete components of the course.

Lectures will be available as recordings. Other learning activities, including tutorials, will be available as recordings.

There is one MDLS Lab scheduled for the course, which is compulsory and will need to be attended in person.

The course will include live online events, including group discussions and tutorials.

Attendance on campus is required for the test and exam.

The activities for the course are scheduled as a standard weekly timetable.

Learning Resources

Taught courses use a learning and collaboration tool called Canvas to provide students with learning materials including reading lists and lecture recordings (where available). Please remember that the recording of any class on a personal device requires the permission of the instructor.

Additional Information on Learning Resources

The notes for Structural Design for Civil Engineers have been arranged into a course book that is available in a PDF form for download from CANVAS. Additional reference material that may be useful is listed for each section of notes.

Copyright

The content and delivery of content in this course are protected by copyright. Material belonging to others may have been used in this course and copied by and solely for the educational purposes of the University under license. You may copy the course content for the purposes of private study or research, but you may not upload onto any third-party site, make a further copy or sell, alter or further reproduce or distribute any part of the course content to another person.

Health and Safety

An appropriate Induction for the Health and Safety requirements of conducting the lab work within the MDLS will be included and required to participate in the MDLS activity. Students are expected to adhere to the guidelines outlined in the Health and Safety section of the Engineering Undergraduate Handbook.

Learning Continuity

In the event of an unexpected disruption, we undertake to maintain the continuity and standard of teaching and learning in all your courses throughout the year. If there are unexpected disruptions the University has contingency plans to ensure that access to your course continues and course assessment continues to meet the principles of the University’s assessment policy. Some adjustments may need to be made in emergencies. You will be kept fully informed by your course co-ordinator/director, and if disruption occurs you should refer to the university website for information about how to proceed.

Academic Integrity

The University of Auckland will not tolerate cheating, or assisting others to cheat, and views cheating in coursework as a serious academic offence. The work that a student submits for grading must be the student's own work, reflecting their learning. Where work from other sources is used, it must be properly acknowledged and referenced. This requirement also applies to sources on the internet. A student's assessed work may be reviewed for potential plagiarism or other forms of academic misconduct, using computerised detection mechanisms.

Similarly, research students must meet the University’s expectations of good research practice. This requires:

  • Honesty - in all aspects of research work
  • Accountability - in the conduct of research
  • Professional courtesy and fairness – in working with others
  • Good stewardship – on behalf of others
  • Transparency – of research process and presentation of results
  • Clarity - communication to be understandable, explainable and accessible

For more information on the University’s expectations of academic integrity, please see the Academic Conduct section of the University policy hub.

Disclaimer

Elements of this outline may be subject to change. The latest information about taught courses is made available to enrolled students in Canvas.

Students may be asked to submit assessments digitally. The University reserves the right to conduct scheduled tests and examinations online or through the use of computers or other electronic devices. Where tests or examinations are conducted online remote invigilation arrangements may be used. In exceptional circumstances changes to elements of this course may be necessary at short notice. Students enrolled in this course will be informed of any such changes and the reasons for them, as soon as possible, through Canvas.


Assessment and Learning Outcomes

Additional Information on Assessment

Students must sit the exam to pass the course. Otherwise, a DNS (did not sit) result will be returned.

A passing mark is 50% or higher, according to University policy

Late submissions will not be accepted/allowed for the exam, tests, and online quizzes. It is possible to submit late for the assignments and projects, and the late submission penalty schedule will be published on the course Canvas page.

Course Learning Outcomes

CLO #OutcomeProgramme Capability Link
1
2
3
4
5
6

Assessments

Assessment TypeAssessment PercentageAssessment Classification

Assessment to CLO Mapping

Assessment Type123456

Student Feedback, Support and Charter

Student Feedback

Feedback on taught courses is gathered from students at the end of each semester through a tool called SET or Qualtrics. The lecturers and course co-ordinators will consider all feedback and respond with summaries and actions. Your feedback helps teachers to improve the course and its delivery for future students. In addition, class Representatives in each class can take feedback to the department and faculty staff-student consultative committees.

Additional Information on Student Feedback

Based on students' feedback, key changes to the course for the next offering include:

i) a timetable change for when the tutorial occurs with respect to the lectures' delivery, and

ii) an overview of the associated design standards that guide the teaching material.

Class representatives

Class representatives are students tasked with representing student issues to departments, faculties, and the wider university. If you have a complaint about this course, please contact your class rep who will know how to raise it in the right channels. See your departmental noticeboard for contact details for your class reps.

Tuākana

Tuākana is a multi-faceted programme for Māori and Pacific students providing topic specific tutorials, one-on-one sessions, test and exam preparation and more. Explore your options at Tuakana Learning Communities.

Inclusive Learning

All students are asked to discuss any impairment related requirements privately, face to face and/or in written form with the course coordinator, lecturer or tutor. Student Disability Services also provides support for students with a wide range of impairments, both visible and invisible, to succeed and excel at the University. For more information and contact details, please visit the Student Disability Services’ website.

Wellbeing

We all go through tough times during the semester, or see our friends struggling. There is lots of help out there - please see the Support Services page for information on support services in the University and the wider community.

Special Circumstances

If your ability to complete assessed work is affected by illness or other personal circumstances outside of your control, contact a member of teaching staff as soon as possible before the assessment is due. If your personal circumstances significantly affect your performance, or preparation, for an exam or eligible written test, refer to the University’s aegrotat or compassionate consideration page. This should be done as soon as possible and no later than seven days after the affected test or exam date.

Student Charter and Responsibilities

The Student Charter assumes and acknowledges that students are active participants in the learning process and that they have responsibilities to the institution and the international community of scholars. The University expects that students will act at all times in a way that demonstrates respect for the rights of other students and staff so that the learning environment is both safe and productive. For further information visit Student Charter.

Student Academic Complaints and Disputes

Students with concerns about teaching including how a course is delivered, the resources provided, or supervision arrangements, have the right to express their concerns and seek resolution. The university encourages informal resolution where possible, as this is quicker and less stressful. For information on the informal and formal complaints processes, please refer to the Student Academic Complaints Statute in the Student Policies and Guidelines section of the Policy Hub.